The computer does not see the microsd memory card. What to do when the computer does not recognize the memory card. What actions to take if the device refuses to recognize the memory card
In this article, we will look at several reasons why the computer may not see the memory card, and also provide solutions to this problem.
In order to fix the problem, you need to find the cause. The reason can be both hardware and software. Consider step by step what to do when the computer does not want to see SD or microSD.
Step 1: Checking the health of the flash card and card reader
Check if your SD card is working. To do this, just connect it to another computer or laptop. Also, if you have another memory card of the same model, then check if it is recognized on your computer. If so, then the card reader on the computer is working and the problem is in the card itself. The reason for the failure of the memory card may be incorrect removal during operation or its physical deterioration. In this case, you can try to restore the SD card. To do this, experts distinguish 2 ways:
This utility allows you to quickly restore the performance of a memory card. If it is password protected, then the program will not be able to format the card.
If the card reader itself does not see the memory card, you need to contact the service department for repairs. If the device needs to be used urgently, you can use a temporary solution: use a portable card reader that can be connected to a laptop via a USB port.
It happens that the flash card is not detected by the computer due to a lack of power. This is possible with a large amount of storage, a faulty power supply, and overloaded USB ports.
There may be a model incompatibility issue. There are two types of memory cards: SD with byte-by-byte page addressing and SDHC with sector-by-sector addressing. If an SDHC card is inserted into the SD device, it may not be detected. In this situation, use an SD-MMC adapter. It also plugs into the computer's USB port. On the other side there is a slot for different types of memory cards.
Step 2: Checking for Windows failure
The reasons due to which the memory card is not recognized by the computer, related to the failure of the operating system, may be:
The DriverPack Solution program is very popular for finding and updating outdated drivers. To use it, do this:
It is best to take the driver on the website of the manufacturer of your memory card. So, for example, for Transcend cards, it is better to go to. Remember that installing drivers from unverified sites can harm your computer.
Step 3: Check for viruses
An antivirus program must be installed on the computer. To fix the problem, it is enough to scan the computer along with the flash drive for viruses and delete the infected files. For this in "Computer" right-click to open the drop-down menu and select the item there "Scan".
Often the virus changes the file attribute to "hidden", so they can be seen if you change the system settings. To do this, do this:
- go to "Control Panel", then in "System and safety" and "Folders settings";
- enter the tab "View";
- in parameter "Show hidden files and folders" set a mark;
- click "OK".
Often, after a flash card is infected with viruses, it has to be formatted and the data is lost.
Remember that the data on the memory card may disappear at the most inopportune moment. Therefore, make periodic backups. This will protect you from losing important information.
To expand the information storage system in the phone, we often use flash cards. This is an additional amount of memory for portable devices. MicroSD is the minimum card format with adapters to be used in regular SD card slots. The amount of additional memory provided by these devices can reach 2 TB. For their correct use, you should take into account the compatibility of phone formats and used memory cards.
There are several reasons why you can immediately determine the need to use an additional memory card: frequent crashes and freezes in the photo and video shooting mode, the output is corrupted video files, long buffering in the shooting mode.
There are situations when the phone does not see the applied card. This happens with both new and already tested flash drives. The situation is unpleasant, but possible to resolve and correct.
Why the phone does not see the microSD flash drive
There can be many reasons for your phone's blindness in relation to a flash drive. The correct definition of true - will help to quickly correct the situation. The first task is to try to analyze this event and to put aside or confirm the most obvious causes of the problem. To do this, even as a simple user, you can perform some operations to clarify the situation.
A thorough external examination of the Micro SD flash drive will help determine whether there is a violation of the integrity or physical deterioration, what are its operational periods, whether there are any discrepancies in the parameters of use with the phone, perhaps there is a clogging or violation of the contacts of the card capture reader.
The specifications of the MicroSD memory card can be read on the surface of the card, next to the logo. There are data on compatibility with standard devices by class and recording speed, interface support is indicated.
If the appearance and usage matches are OK, it's possible that the file system is causing the problem.
Problems with internal memory
The internal memory of the phone is certainly not an infinite thing, but sometimes the problem is not at all its overcrowding. In the desire to clean it, we surpass ourselves and, in a rush to remove the unnecessary, we delete the files responsible for the coordinated operation of the operating system. This is where the root of the problem could be. Together with unnecessary files, we could delete important and necessary for the correct operation of the system. System analysis and restoration will be required to normalize the situation.
If you are not experienced enough, but persistent in your desire to deal with your device on your own, and the system allows you to do this (access via root rights is open), be careful and attentive, try not to touch what you do not understand, and if you have already decided, study this issue at least by means of the Internet.
What to do first
What can be done to resolve this problem at the user level without complicating the situation and without interfering with the smooth operation of the system.
Inspect the Micro SD card for physical damage such as scratches, deformations.
Check the contact and cleanliness of the connections with the card capture reader. If possible, clean them of dust, litter or foreign matter.
Find out the compatibility of the device used and the ability of the phone to support it in terms of technical and technological parameters.
Consider the operating time of the MicroSD. Perhaps the technical resource of this device has already been exhausted.
If these simple studies do not give a result, then you should proceed to more complex manipulations and a close study of the state of the flash card. To get started, just restart your phone. Turn it off completely and then turn it back on. At the same time, a superficial analysis of the system takes place and minor inconsistencies, failures and violations in its operation are usually eliminated.
recovery mode
If a normal reboot does not help, the Android system provides a Recovery mode for system programs. It checks the integrity of the file system and gives commands to reset the settings. When this mode is running, the main program files are saved on the created restore point, the operation of the settings and some parameters is affected. Refers to the modes provided by the device manufacturer.
There can be several ways to enter it. One of the most common ways to access it is by pressing the power buttons and volume down at the same time. You may have to search the Internet for features of entering Recovery mode for your phone brand.
If everything worked out for you, you will see the service menu on the screen. Select the menu line wipe cache partition and restart the device.
This operation should correct the situation, but if no changes have occurred, you will have to look for another reason for the incorrect operation of the system.
You can determine the cause of this situation and find out whether everything is in order with the phone or if it's still in the MicroSD flash drive, you can insert it into another phone. If another device immediately sees the inserted card, then your phone requires, if not repair, then a thorough inspection. If a third-party device also does not notice the inserted memory card, then the problem is clearly in it.
Problems with the microSD card on the computer
You can also determine the state of the flash drive using a computer. If the card inserted into it is not reflected, then it is she who is the problem in this situation.
One source of your trouble may be the file system. As a variant of such an error, incorrect disk names. Although the computer recognizes the inserted card. How to fix this situation?
When you enter the disk management system (Win + X), run the diskmgmt.msc command, so you can even detect unformatted disks. Confusion can arise due to the same letter names of different disks. Therefore, they need to be changed. If such a name match occurs, select the “rename” command and change the name of the disk. Please note that after this, the phone may not see the maps due to the name change. Therefore, when deciding on changes in the name, make sure that the given name is in the correct format. Otherwise, the phone simply will not recognize the flash drive as a disk and you will return to the stage from which you started. Perhaps the output will be formatting the card, full or partial.
How to restore the microSD card
Self-recovery of a problematic Micro SD card usually begins with a standard error check. Using Explorer, we specify the check of the desired disk with automatic correction of detected errors. Use surface text to restore sectors.
When formatting a memory card, leave the file system FAT32. Android does not read formats such as NTFS. Although FAT32 may be the default.
After the operation, insert the USB flash drive into the phone and check the result.
You can try to resume access to the memory card in the HKLM branch. Through the SYSTEM folder in the storage device policies section, we assign a zero value to the defining parameter (0x00000000 (0)). After that, the parameters and system registry keys are normalized. This may help resolve the MicroSD access issue.
If physical damage is found on the flash drive due to incorrect operation of the microcontroller, we find utilities for formatting by VID and PID parameters. Assistant - program USBIDCheck. If you decide to look for the necessary data on the flash drive itself, you will have to disassemble it to get to the internal microcircuit, where the necessary data about the manufacturer is located. On them we find and download the appropriate program, and with its help we perform formatting.
After each stage of work, do not forget to control the state of the memory card and check the result of the work by inserting it into the phone.
conclusions
Studying these materials will help you navigate if you encounter problems using a MicroSD card to increase the memory capacity of your phone and expand its user capabilities. It will help to correctly determine the reasons associated with not displaying an additional memory card. After analyzing the situation, you will be able to understand whether it is possible to resolve the situation on your own or you should seek help from service centers.
As a rule, most issues related to such a nuisance in the operation of the device are resolved safely at the user level. If the above methods did not bring results, you still could not do anything with the Micro SD, do not rush to throw away the problematic device, you should still contact the specialists.
Most information today is stored on flash cards. Photos or movies, documents or other information on the microSD card can be easily read through the adapter in the laptop. When there are problems with the reader, the exchange of information becomes impossible, which creates a lot of problems for the user.
To date, of all types of portable memory cards, microSD flash cards are the most convenient and widely used. They are used in phones, smartphones, players, tablets, cameras and other portable and computer equipment.
To figure out why the laptop does not see the micro SD flash drive through the adapter, you can try to find the cause and fix it yourself, or use the help of Orion Service specialists.
Features of reading from a microSD card
To read data from microSD, you need an adapter, which is usually included with the purchased flash card. To turn it on, the USB flash drive is placed in the adapter, and the adapter itself is connected to the connector on the laptop (the SD connector on the side or front of the laptop panel). If the flash drive has a new format, for example, SDHC, some obsolete laptop models may not recognize or read this type of flash card. The solution to this problem is to purchase an external card reader, which is enabled via the USB port.
Possible causes of the malfunction and their solutions
A laptop may not see a microSD flash card due to many reasons.
Software error
You can determine the status of the OS and software by testing the laptop with utilities that allow you to see all the errors that have arisen in the work. For accurate diagnosis, it is recommended
return the laptop to the service center "Service Orion".
Missing the right driver
If there is no driver on the laptop you just bought, you can install it from the disk that comes with the product. If the laptop is of an old model, bought from hand or has been formatted disks, it will not be difficult to find the right driver for it. To do this, you can use programs to update drivers.
Laptop virus infection
There are a number of virus software that block the device's ability to freely access disks. The solution to the problem is to run an antivirus program, recognize malware and remove it.
Flash drive failure
To make sure that the microSD flash card is broken, you need to install it in another laptop or device. If the problem reappears, the reason lies in the flash drive itself; if the laptop sees it, you need to look for the reasons in the device itself.
In order to restore the performance of an external storage medium, you can try formatting the disk. The procedure proceeds with the cleaning of all information recorded on the media. Formatting can be requested by the laptop system itself or forced using a command in the context menu (if the flash drive is identified by the laptop and displayed in Explorer).
Card reader does not support microSD card reader
To fix the problem, you can buy an external card reader or order a replacement for the old card reader through a hardware repair.
Drives have the same letters
One of the problems that you can fix yourself is the coincidence of the letters of the hard drive and flash drive (for example, the letter F). In such a situation, "My Computer" reflects only one drive, usually built-in, not external media. To fix this situation, you need to change the drive letter through the Disk Management dialog box (Win and X keyboard shortcut command).
If you need to urgently copy or use information from a microSD card, you can not use a USB flash drive and adapter at all. For example, reading data is possible from a card on the phone without removing it. All you have to do is connect your phone with a USB cable to your laptop. In Windows 7 and 8, there is no need to install special software for this, as the system automatically selects a driver, recognizes a flash drive and reads video, photos, text files and files of other formats.
Sometimes a problem can arise due to a banal loss of contact. This usually happens when you frequently remove and insert a microSD flash drive into the adapter. Trying to remove and reinsert the memory card may resolve the issue.
If all attempts to correct the situation on your own did not give the desired result, you can repair the breakdown at the Devay Service company. Here, specialists conduct a complete diagnosis, determine the exact reason why the laptop does not see the microSD flash drive through the adapter, and quickly restore this function of the laptop at affordable prices with a guarantee for the work done. In this case, the repair time is a matter of hours.
Nowadays, it is much easier for users to store the information they need. It is absolutely not necessary to load the PC memory, since there are many third-party elements - flash drives, CDs and DVDs. Micro and miniSD, as well as regular SD, are also very popular.
Each of the proposed tools may malfunction. This manifests itself in the fact that as soon as the user removes the removable media directly from the mobile, camera and other device and inserts it into the PC connector, the computer simply cannot detect the SD.
There may be several reasons for this development. In some cases, this is the result of the action of viruses. Also, banal errors may occur during the user's work. Often the reason lies directly in the inoperability of removable media.
Species diversity of SD cards
It is worth paying attention to the most common causes of problems. But before that, it is worth finding out exactly what types of flash cards exist. Almost all users confuse one card with another. Manufacturers have developed several types of SD.
There are special elements for mobile devices. There are also cards for photo and video equipment. So each type of device has its own tools. This is due to the different requirements for the amount of stored information and the speed of operation.
microSD cards are very popular. Such elements are inserted into mobile devices, tablets and players. With the help of these objects, it is possible to significantly increase the memory. This makes it possible to save much more audio and video recordings, photos.
Complete with such devices, users are encouraged to purchase special adapters. With their help, you can connect SD cards to a laptop. Not so relevant, but still often used - miniSD. These assistants are also suitable for portable equipment.
SD cards are excellent devices that have free memory from 8 MB to 2 TB. Such a large amount of size is necessary for users for DVRs, cameras. At the same time, the cards are able to function at speed with excellent performance.
Features in the process of working with flash cards
Each such element contains information about the speed of the object and the class of the instrument. When selecting a card, it is necessary to take into account which class is required for a particular device. You also need to pick up a special adapter. It can be several assistants in one set.
In many "weak" personal computers, developers have provided for the presence of built-in card readers. But these assistants are not able to recognize the new types of SDHC cards being used. But even in this situation there is a solution. Users will need to purchase a card reader that will connect to a regular USB port. Such connectors resemble standard flash drives.
Reasons for not recognizing flash drives
In some cases, just one drive letter can prevent the detection of removable drives, including flash drives, external hard drives. Any hard drive and flash drive can have the letter F. For this reason, it is impossible to recognize the connected device.
To quickly fix this, you will need to go to the panel to manage all disks. This path is different for different versions of the operating system. If Windows 8 is installed, then you need to simultaneously click on the Win + X buttons and hold down. In the context menu that appears, select Disk Management.
For OS version 7, you need to click on Win and simultaneously press R. Next, you need to enter a simple command "diskmgmt.msc". Immediately after that, a new window will open. All disks and other connected devices will appear in it. You can also see formatted devices.
The desired flash card will be shown in the same list. Immediately after that, you should change the original version of the letter to a unique version. It is necessary to make adjustments to the context menu that appears immediately after right-clicking on the desired object for storing data. Next, we carry out formatting, during which the drive will be completely cleared of information.
The next common cause is the lack of drivers. Even if the user works with a new device and constantly updates the necessary components, this is not a guarantee that the device will work in normal mode.
If by chance it was discovered that at least one driver was missing, then you can use special assistants. Thanks to the utilities, it is possible to detect a package of the necessary drivers for each device. It is enough to enter a request on the network to search for a utility to update drivers.
Once these actions are implemented, it will be possible to immediately proceed to the next stage. In some cases, users try to insert an SD card into any device. Only after that we connect a mobile device, a camera with a flash card directly to a personal computer. To do this, use a special USB cable.
In some cases, users try not to use additional utilities. Only owners of new versions of the Windows operating system can afford this. Then the process of installing the necessary drivers and the subsequent configuration of the PC parameters is performed without user intervention.
In other cases, the very first time you connect a device to a dedicated port, you will need to download additional software. There are unique drivers for all device models. Users need to pick them up and install them. Only after that the used memory card will be visible on any computer.
So users can solve the problem in several ways. Rodin of the proposed options without fail will be effective. It is only necessary to carry out all the steps correctly to ensure an excellent result.
The computer does not see the flash drive - there is a solution.Hello. Your the computer does not see the flash drive , memory card or hard drive and you are wondering what to do? Surely every computer user has a similar situation, or even more than one.
Today I will help you with this question. I'll tell you what are the problems with displaying usb devices and how to solve them. By the way, the last article was about data recovery from a flash drive. If you are interested, then replenish the baggage of your knowledge.
Your computer does not see or recognize the flash drive, hard drive and memory card. Let's look at the possible reasons for this situation. At the end of the article, do not forget to watch a visual video tutorial on how to make a flash drive or hard drive work.
A small outline of the article
- Device definition
- Power indicator
- Front USB ports
- Lack of nutrition
- usb disabled in bios
- usb device not recognized
- Outdated drivers
- Viruses
- Different file systems
- Conclusion
We define the device
The first step is to determine exactly how the computer does not see your usb drive. From this answer it will be clear whether it is possible to recover data from a flash drive or not.
To do this, you need to go to the Windows Device Manager.
In order to enter it, you need to right-click on the shortcut of my computer on the desktop or in the start menu, go to properties, click on device manager.
Then select disk devices.
We got into the device manager and the disk devices tab. If your flash drive or memory card is displayed in this list, then with a high probability you can recover data on them. If the flash drive is not there, then most likely the memory card controller has burned out. I recommend trying to connect your usb device to other computers.
If nothing changes and the flash drive is also not visible, then the problem is probably a faulty controller. From such a usb device, you can hardly pull out data, you can, of course, contact special institutions that do this (they are not available in all cities), but they will charge you a tidy sum for work. So think about whether you need it or not.
Your flash drive is visible as a device, but it does not appear in my computer or explorer, or it asks to be formatted. To do this, you need to go to disk management. To access it, you need to follow these steps. Here are screenshots for clarity:
The device is displayed, writes its volume and file system - it is ready for use and functions normally.
The device is displayed, shows its volume, but does not display the file system and writes "not defined". In order to use it, you need to right-click in the undefined box and select format. You can check the quick format box and click OK. After the device is formatted, it should work in normal operating mode.
Displayed as a removable device, writes no media and does not show the file system. All these parameters indicate that this device is not working properly, there are internal or external damage to the controller. You can hardly read information from such a flash drive without special expensive equipment.
Power indicator
When the flash drive is connected to the computer, a small indicator on the usb device should light up. If it caught fire and started blinking, then everything is fine with the flash drive, but not with the operating system, you need to look for the reason in it. If the flash drive indicator does not light up, then the problem may be in the device itself or the connected port on the computer.
Front USB ports
There have been cases when a flash drive is connected to a computer through the front usb ports, but the flash drive does not work. Perhaps these front usb are turned off or they forgot to connect them to the motherboard.
Not enough food
The lack of power mainly occurs when connecting hard drives through the front usb ports of the computer, hubs and hubs. It is best to connect such devices directly to the usb connectors on the motherboard, that is, on the back of the computer. If you are using a usb hub or hub, then disconnect unnecessary devices, maybe this will help. Also, the reason may be in the low-powered power supply of the computer.
usb disabled in bios
This problem rarely happens. Mostly in computer clubs and similar entertainment venues. What is it for? So that a person does not bring viruses and does not download various programs and unnecessary information to the computer. It's more of a protection measure. If this is a home computer, then you need to go into the BIOS settings and check the box to enable the launch of usb devices on the motherboard.
usb device not recognized
The usb device is not recognized and when a USB flash drive is connected, the operating system gives it an already used letter (used volume label). This does not always happen, there are other cases. In order to fix this, you need to go to the computer control panel.
I showed how to enter it above, or you can call the Run window - the keyboard shortcut Win + R (the checkbox between Ctrl and Alt plus the letter R) and type the command diskmgmt.msc. Go to disk management, find the desired device - a USB flash drive, right-click on it and select Change drive letter or drive path. In the window that appears, you can add or change this letter.
Outdated drivers
It is possible that you have outdated drivers - update them. To do this, you need to find out which company is the manufacturer and model of your motherboard. Usually written on the box with the packaging, if you saved them of course. If not, then use the Everest or Aida program. With the help of them, you can find out the model of your motherboard and a lot of other useful information about your computer. After everyone knows, you need to go to the official website of the manufacturer, find the required motherboard and download the drivers for the chipset and usb device, if any.
Viruses
There have been cases that the computer does not recognize the flash drive due to viruses that have appeared in your operating system. To do this, I recommend using good antivirus programs and doing a full virus scan at least once a month. If you don't have it, you can use the free antivirus Kaspersky Yandex version, or purchase a paid product.
Different file systems
This happens, but very rarely. Your computer does not see the flash drive due to a conflict between the file systems of the computer and the flash drive. Most flash drives work in two file systems FAT and FAT32, and hard drives in NTFS.
You can try formatting your flash drive in another format such as FAT32 or NTFS. Maybe everything will work fine after that.
Useful information. On a flash drive in FAT and FAT32 format, you can upload information in one file no more than 4 Gigabytes, and much more on a hard drive. Therefore, if you encounter such a problem, be prepared for this and keep in mind.
And for dessert, watch a short video tutorial on how to make the computer see a USB flash drive and hard drive. For convenient and enjoyable viewing, I recommend watching this video in full screen, that is, in full screen mode.
The computer does not see the flash drive and hard drive